Beard Style Finder

How to Grow and Maintain the Perfect Disconnected Goatee Shape

Growing a disconnected goatee doesn’t have to be complex or complicated. Here are the steps it takes to grow one out yourself.

1. Grow Out The Facial Hair

First, you must grow out the facial hair around the mouth to start the goatee. Later, we will trim out the unwanted areas, but it’s best to start with a complete look. That means growing the hair around your upper lip, sides of your mouth, and chin to at least half an inch or more in length. We recommend growing it a little past the final result you want to have so you have room to style it and trim it down. Take some beard supplements if you struggle to get the proper hair growth.

2. Trim The Hair

Next, you will want to trim the hair back a little. This does a couple of things. First, trimming the facial hair will help it grow more. Secondly, trimming the hair will give it a better appearance overall. Use a comb and scissors that you can find in any grooming kit. Brush the comb and only reveal the hair that you want to remove. Then use scissors or a beard trimmer to shave off the unwanted hair. If you’ve grown more hair than needed, say around your jawline or neck area, then now is an excellent time to remove it too.

3. Shave And Style

Finally, you must shave off the excess hair and style the goatee. Using a shaving lube and a professional razor, begin to shave your face. Start with warm water, lather up with the lube, and shave around the jawline, neck, and cheeks. Then you need to shave off the facial hair on the sides of the mouth to disconnect the goatee, so it doesn’t complete a full circle. You can be as generous as you’d like, but we suggest shaving off at least a quarter inch of hair or more.

Here are some of our favorite product recommendations to help you get the perfect disconnected goatee:

• Beard Growth Supplements: All-natural ingredients boost hair growth and make your goatee luscious and full.
• The Expert Grooming Kit: This kit has everything you need to style your disconnected goatee, including scissors, a razor, a comb, a beard brush, and a beard-shaping tool.
• Shave Lube: Professional shave lube will give you a smooth and clean shave.

How to Grow and Maintain the Perfect Extended Goatee

Growing an extended goatee does not have to be intimidating. Just follow these steps.

1. Growing Out Process

A stunning extended goatee requires some hair length. Allow yourself a few weeks of growth to have at least two to three inches of hair before attempting to style. Start using a beard wash and conditioner and brushing daily to tame your hair to grow downward.

2. Trim

After the hair has grown out, it is time to start shaping. First, start with an electric trimmer or scissors and a comb and get your hair down to the desired length. Be careful not to cut too short; it is better to trim more later. We recommend using a precision trimming instrument to ensure all lines are sharp and clean.

3. Style 

The best style of an extended goatee depends on the individual wearing it. This style is a simple one to accomplish because it is flexible. It can be tamed down with beard butter or left a bit more rugged using beard oil. After applying the beard butter, grab the hairs on your chin and pull them to a point. The chin hair should be left longer than the rest of the goatee to give it the right extended look. You can either shave off your jaw and neckline hair for a true extended goatee look or keep it for a rugged style.

Here are some of our favorite product recommendations to help you get the perfect Extended Goatee:

• The Rebel Set: This handy set includes beard shampoo, conditioner, face moisturizer, and a bonus nail kit and travel bag.
• The Edge Beard Shaping Tool: a multi-purpose precision trimming instrument designed with a precise edge to match the contour of your face.
• Beard Oil, Balm Conditioner, And Beard Shaping Tool Mens Gift Set: The perfect gift set includes beard oil, balm, and a shaping tool for the ideal beard every time.

How to Grow and Maintain the Perfect Low Chin Goatee

Growing a low chin goatee requires a bit of shaping and maintenance. Here’s how to do it:

1. Let It Grow

Allow your beard and mustache to grow out about two to three inches. We recommend starting a beard elixir with crucial vitamins and minerals to help you grow a thicker beard.

2. Shape and Trim

Once your beard has grown, it's time to start shaping it. Begin by trimming the hair on the underside of your chin using a beard trimmer or scissors. Start at the base of your chin and work your way down to the desired length. Next, trim the hair on the sides of your goatee, starting at the bottom of the chin and working your way out towards the cheeks. To create a defined shape, use a shaping tool like The Edge Beard Shaping Tool to define your goatee's edges. Finally, use a beard comb to smooth out stray hair and shape your goatee as desired.

3. Maintain 

You can keep your low chin goatee looking perfect and well-maintained by washing your face and goatee regularly with a beard shampoo to keep it clean and healthy. Make sure to use beard oil to moisturize your goatee and skin underneath. Using a moisturizer will help to keep it soft and prevent flaky skin. Trim your goatee regularly to maintain its shape and desired length and to keep it neat and well-groomed.

4. [STEP 4]

[DESCRIPTION OF STEP 4]

Here are some of our favorite product recommendations to help you get the perfect Low Chin Goatee:

• Beard Elixir - Fresh Squeeze: Grow a thicker and fuller-looking beard by nourishing it with a powerful blend of natural ingredients, key vitamins, and minerals.
• The Edge Beard Shaping Tool: This multi-purpose tool has a precise curved edge to match the contours of your face, allowing you to maintain perfect lines for your beard, mustache, or goatee.
• Beard Shampoo: Wash your beard with essential oils and other gentle ingredients that will clean your beard without stripping away precious sebum oil.

How to Grow and Maintain the Perfect Musketeer Goatee

Growing and maintaining a musketeer goatee requires attention to detail and regular grooming. Here's how to achieve and maintain this classic facial hair style:

1. Let Your Facial Hair Grow

To achieve the perfect musketeer goatee, you must start by growing your facial hair two to three inches. Depending on your beard growth rate, the growing-out process may take a few weeks or even months. You can use a beard elixir to help speed up the process with the power of vitamins and minerals. In the meantime, keep your cheek and neck area clean-shaven to help define the goatee shape.

2. Trim and Shape Your Goatee

Begin by trimming your beard to a medium length, using scissors and a comb. This style requires thicker hair, so be careful not to cut too much off. Next, use a razor with a fine blade to define the goatee's edges. The goatee should extend from just below the lower lip to the bottom of the chin and as wide as the mouth. Once you have defined the goatee's edges, use a beard trimmer to remove any stray hairs outside of the desired shape. Finally, use beard butter to groom and style the goatee as desired.

3. Maintain Your Musketeer Goatee 

To maintain your musketeer goatee, you must trim it every few days to keep it at the desired length. Use a beard trimmer with adjustable settings to achieve the perfect measurement. You can also use a beard scruff tamer to help define and shape your musketeer goatee.

4. [STEP 4]

[DESCRIPTION OF STEP 4]

Here are some of our favorite product recommendations to help you get the perfect Musketeer Goatee:

• Beard Elixir - Fresh Squeeze: Grow a thicker and fuller-looking beard with a powerful blend of natural ingredients, key vitamins, and minerals.
• Beard Butter: This beard butter contains a blend of natural oils and butter to moisturize and soften your facial hair, making it easier to style and maintain.
• Beard Scruff Tamer: This scruff tamer is perfect for short beards, stubble, and scruff.

How to Grow and Maintain the Perfect Door Knocker Goatee

Growing a door knocker goatee requires some time, but it is achievable with the following steps.

1. Start Growing

You'll need to let your goatee grow to the desired length and thickness to get started. For this style, it is recommended to start with two to three inches of hair. You should use a beard growth supplement to help speed up the process with all-natural vitamins and minerals promoting growth from the inside out.

2. Shape and Trim

First, use a beard trimmer to cut your beard to a medium length. Then, use a fine-toothed razor to define the outline of the goatee. The goatee should extend from just below your lower lip to the base of your chin and about as wide as your mouth. After establishing the outline of the goatee, use scissors to remove any stray hairs that fall outside the desired shape. To create the small, circular patch of beard underneath the lower lip characteristic of the door knocker goatee, use a beard trimmer to shave the hair from the area just under the lip. Finally, make sure to use shaving lube when cleaning up the cheeks and neckline to ensure no skin irritations.

3. Moisturize and Style 

Use beard oil to moisturize and soften your facial hair to keep your door knocker goatee looking healthy and stylish. Use beard oil to moisturize and soften your facial hair. Use a brush to style your goatee into place, and add a finishing touch with the beard butter. This butter provides a solid hold to keep your door knocker goatee looking great all day long.

 

Here are some of our favorite product recommendations to help you get the perfect Door Knocker Goatee:

• Beard Growth Supplements: These beard growth capsules are infused with all-natural ingredients that support growth from within.
• Shave Lube: This shave lube promotes the benefits of caffeine to reduce redness, along with calming jojoba and smoothing eucalyptus to keep skin looking and feeling fresh and healthy all day long.
• Men's Gift set: This complete gift set includes beard butter, beard elixir, and a precision shaping tool.

How to Grow and Maintain the Perfect Pure Goatee

Growing a pure goatee is as easy as these steps, regardless of your face shape!

1. Grow The Foundation

This style requires you to grow a beard while skipping the mustache. If your hair growth is patchy or slow, we recommend trying some beard growth supplements to aid in this process by nourishing your body. Supplements like these have all-natural ingredients that have been proven to speed up your hair growth and thicken facial hair.

2. Give It a Shape

Once your foundation is sufficiently grown, it is time to start shaping the pure goatee. Using a grooming kit, mold the goatee into the shape you desire. Take the included beard-shaping tool in the grooming kit, hold it to your chin, and shave excess hair around your mouth following the contours of the tool. Make sure the length and width of the goatee are balanced on all sides. Generally, the pure goatee is at most two inches long to maintain a sharp look.

3. Keep Face and Beard Clean

Ensure you keep your goatee and the rest of your face clean throughout the process. A goatee is typically at its best when the rest of the face is clean. Beard shampoo and conditioner will prevent your goatee from getting oily and unmanageable.

Here are some of our favorite product recommendations to help you get the perfect Pure Goatee:

• Beard Growth Gummies Supplements: The ultimate supplement to help you grow a beard.
• Beard Shampoo: Clean your beard with essential oils and other gentle ingredients that will clean your beard without stripping away precious sebum oil.
• The Expert Grooming Kit: You must style and groom your beard daily.